Bathtub reglazing, also known as the bathtub and shower repair resurfacing is essentially the process by which restored an old bathtub, worn as a new condition by applying a new finish on the surface of enamel in the bathtub. Thus, the names reglazing, refinishing and resurfacing.
The bathtub reglazing developed in the 1950s because of the inconvenience and high cost of replacing a bathtub.
Replacing a bathtub is not only expensive but can also be a real nuisance. You must contact the elimination of the old bathtub, breaking tiles and retiling. You might need to do some plumbing work to replace the damaged pipe as a result of the removal procedure and of course, plug in the new bath to existing plumbing.
The cost of doing all this work, it can add at least two thousand dollars. And even if you know how to do the work yourself and are willing to go through the hassle, a decent bathroom will cost at least $ 800. 00 to replace. A bath can be blows right into your bathroom without disturbing the existing tables, fixtures or pipes.
The process takes three to four hours and is ready after 24 hours. There are several methods and materials used in the process of bathtub reglazing. Many use an acid solution to save the tub, then spray on an epoxy primer and finally a layer of acrylic finish. The problem with this system is that strong acids (such as acid hyrofluoric) destroys the surface so that it continues to deteriorate, even after the primer is applied. This can cause the material to break with the constant use of hot water.
Some use a chemical binding agent (primary fabric) instead of an epoxy primer spray. This type of primer is easier and faster to implement, but the link created is lower than the epoxy spray and is likely to decompose in two years with constant use of hot water. Clean the primers are recommended for glass only.
The best way to blows a bath is to clean the surface with an industrial cleaner as well, the first in the bathtub with water resistant epoxy primer that does not require etching and finally apply an aliphatic acrylic urethane which is designed especially for the bathtub reglazing industry. If the process succeeds, and the tub is maintained properly, bathtub reglazing could be an excellent alternative effective cost of replacing an old worn tub.